6
Attaching the Fix Plates
1.
Make sure that the material and frame are both lying face down on a clean, dry and non-abrasive
surface.
2.
Center the material inside the frame.
Please note the material will be noticeably smaller because stretching the material is required to
create a sufficient amount of tension for perfect material flatness.
3.
Start attaching the
Fix Plates
in the center of the
Horizontal Curved Frame’s
edge and (1) then
alternate with the center short sides (2) as shown in diagram.
Note:
Follow these instructions to make sure the material is properly fixed in the center position of the
frame. After attaching the
Fix Plates
in sequence #2 (the center of the short sides), please remove the
fix plates in sequence #1 (the center of the long horizontal edge) and reattach them again, and
also remove the fix plates on sequence# (2) and reattach them again.
4.
Then continue to follow our recommended order numbers 3-8 to properly distribute tension to the
screen material.
