
QUICK GUIDE TO PROCESSING INGREDIENTS
*First cut food with a firm consistency such as fruit and vegetables into smaller pieces
measuring 1 - 1.5" and only then blend it.
Ingredients
Recommended Blending Time
Fruit and vegetables cut into smaller pieces
30s
Smoothies and cocktails
40s
Salsa
30s
Soups
30s
Baby Food
40s
NOTE: The above food processing times are only a reference. The actual blending time
depends on the size of the ingredients, their amount and the required final consistency.
CLEANING AND MAINTENANCE
1.
Before cleaning, make sure that the appliance is turned off and disconnected from the
power socket. Make sure the rotating parts have stopped and remove the assembled
blending jar from the motor unit.
2.
Remove the blade assembly from the blending jar and thoroughly wash the individual
parts in warm water using neutral kitchen detergent. Then rinse them under clean
running water and wipe them dry with a fine wiping cloth or allow them to dry naturally.
If you used the cap, clean it out in the same way. Removable parts can also be safely
washed in the top rack of the dishwasher. To thoroughly clean out the blade assembly,
you can use a fine nylon brush.
ATTENTION: When removing and cleaning the blade assembly take special care to avoid
injury. The edges on the blade assembly are sharp.
The blade assembly has a gasket seal to ensure that the blending jar remains air-tight
during the blending process. If the blade assembly is washed in a dishwasher, this gasket
seal may come loose due to heat. After washing the blade assembly, always check that
the gasket seal is in its place.
Certain foods may cause discoloration of the blending jar. However, this does not have
any effect on the functionality of the appliance.
3.
We recommend that you always wash the accessories immediately after use to prevent
the ingredients from drying on. Ingredients that have dried on, are more difficult to
remove. To remove dried on ingredients, you may start the blender with
the blending jar filled up to 2/3 with hot water. If the dried on ingredients are not
released, repeat the procedure.
4.
To clean the outer surface of the motor unit, use a cloth dipped in a weak detergent
solution. After applying the kitchen detergent, wipe the surface with a cloth lightly
dampened in clean water and then wipe dry.
5.
Never submerge the motor unit or the power cord in water or in any other liquid. Do not
use thinners or solvents or cleaning agents causing abrasion to clean the appliance.
Otherwise, the surface of the appliance may be damaged.
Questions? We're here to help! Visit: www.maxi-matic.com for support on this product.
7