Elite ProAV Pro Frame Acoustic Series Скачать руководство пользователя страница 8

01032020JA 

www.elilteproav.com 

 

CAUTION 

Please follow these instructions carefully to ensure proper maintenance and safety of your Fixed Frame Screen

 

1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture, 

ladders, windows, etc. occupy the space designated for your fixed frame screen. 

2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are used 

and that the weight is supported appropriately by a strong and structurally sound surface just as any large and heavy 

picture frame should. 

(Please consult a home improvement specialist for the best advice on installation) 

3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care. 

4.  When  not  in  use, cover over the  screen  with  a  furniture  sheet  to  protect  it  from  dirt,  grime,  paint  or  any  other 

impurities. 

5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.   

6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface. 

7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp or 

abrasive objects.   

8. Spare Parts should be placed out of reach of small children in accordance with household safety guidelines. 

 

 

For a local Elite Prime Vision contact or Technical Support, please 

visit 

www.eliteproav.com

 

 

Содержание Pro Frame Acoustic Series









Отзывы: