01032020JA
3
www.elilteproav.com
Push
Push
( fig.2)
Insert the exposed ends of the joint connectors
into the short (vertical) frame and align the four
corners so that they meet at perfect right angles
Tension Rod (Horizontal) x 4
Tension Rod (Vertical) x 2
4.
Join all four frame parts together following the steps showed below. After making sure that all four corners join
at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws included
(fig.2)
.
ATTACHING THE SCREEN MATERIAL TO THE FRAME
_
1. Unroll the screen material and lay it down on a clean surface. Then insert the tension rods separately into the
edges of all four corners of the material
(see fig.3)
2.
Make sure the screen material and frame are both lying face down on a clean, dry, and non-abrasive surface.
3.
Carefully unroll the material inside the frame. (Fig.4)
Tension Rod (Horizontal) x 4
push
Tension Rod (Vertical) x 2
(Fig. 3)
Screen Material
Screen Material
push
push
push
push
push
M5
×
15 screws
Screw
( fig.3)
