Page 7/8
8.16.07
17
ATTACH DOORS
Align 2 Hinge parts G1 attached to Door (11) with
2 Hinge parts G2 attached to front inside of Side
Panel. Slide G1 over G2 completely. Be sure
each Set Screw aligns with the slot of
the opposite hinge part.
Tighten
set screw of G2 to fix hinge.
Doors should open
easily, and close
flush with each
other.
Use screw
on G1 to
adjust hinge
alignment.
SEE DIAGRAM
AT RIGHT.
Repeat for
second door.
15
ADD DOOR STOPS
Use the 2 remain-
ing Shelf Pins as
Door Stops by
inserting into
small top holes on
Right and Left
Vertical Divider
Panels.
18
ADD CAMLOCK COVERS
Add Camlock Covers (F) to all visible
Camlocks on vertical panels
11
G1
G1
G2
G2
SET SCREW TO
ADJUST
ALIGNMENT
SET SCREW
TO SECURE
HINGE
Be sure that Set Screw of G1 fits
into slot of G2, and Set Screw of
G2 is within slot of G1.
Attach Door Handle (L) to Door (11) using 2
Machine Screws (H1). Thread each screw
throuogh back of door and short door posts into
long handle portion of Door Handle (L).
Repeat for second Door.
Attach G1 portion
of Hinge unit to
inside upper and
lower portions of
Door (11) using 4
short Screws (J2).
Repeat for second
Door.
H1
G1
G1
L
J
J
11
11
16
DOOR PREPARATION
14
INSERT GLASS SHELVES
Position Shelf Pins (E)
at desired height.
Carefully position
Glass Shelves (8)
onto Shelf
Pins.
8
E