Elite Industries EL-786, Руководство по сборке, Страница: 3 / 8

Page 3/8 8.16.07
C
C
G2
B
A
K
K
4
FRONT
EDGE
BACK
EDGE
NOTE
GROOVE
FOR
BACK
PANEL (7)
Please note in the diagram at the right, the characteristics
of the front and back edges of the side panels.
A. Insert 2 Dowels (C) into outer holes
in top edge of RightSide Panel (4).
B. Insert 2 Camlocks (B) into top of Right
Side Panel (4) as shown.
C. Insert 2 Connecting Bolts (A) into smaller,
outer holes on bottom of Right Side Panel (4)
as indicated.
D. Attach a G2 part of Hinge unit using
2
long screws K to the top front portion
of the inner brace. Attach another G2 part
of Hinge unit using 2 long screws K to the bottom
front portion of the inner brace.
Repeat steps A through D for the Left Side Panel (3).
6
RIGHT AND LEFT SIDE PANEL PREPARATION
7
ATTACH FIXED SHELF TO VERTICAL DIVIDER PANELS
5
BOTTOM FRONT RAIL PREPARATION
Insert 5 Connecting Bolts
(A) into back of Bottom
Front Rail (10) as shown.
10
4
VERTICAL DIVIDER PANEL
PREPARATION
FRONT EDGE
6
6
B
B
C
C
C
A
A
W
Z C
C
NOTE: Each Vertical
Divider Panel (5,6) has:
• a FRONT edge
• an INNER FACE (where
Drawer (12) will rest)
• an OUTER FACE
(where Door (11) will meet)
A. Prepare OUTER FACE
Insert 2 Wooden Dowels (C) into
both the top edge and bottom edge
of Vertical Divider Panel (6).
Insert 4 Camlocks (B) as shown.
FRONT EDGE
B. Prepare INNER FACE
Insert 2 Connecting
Bolts (A) into
inner holes
as shown.
Insert 2 Dowels (C) into
outer holes as shown.
Attach Drawer Rail (W)
using 2 Screws (Z).
Make sure roller is
on front edge.
Repeat Steps A and B for second Vertical Divider Panel (5).
7
6
5
5
6
7
Align Connecting Bolts and Dowels of
Vertical Divider Panels (5,6) with holes on
Center Fixed Shelf (7).
Make sure all front
edges are aligned. Butt pieces together.
On underside of Fixed Shelf (7),
turn all Camlocks 180° clockwise to lock.
FRONT EDGES
DO NO T
INSERT
CONNECTING
BOLT
FURTHER
THAN DEPTH
SHOWN.
DO NO T
INSERT
CONNECTING
BOLT
FURTHER
THAN DEPTH
SHOWN.
CAMLOCK
CONNECTING BOLT
PROCEDURE
Be sure
to insert
Camlocks
with the
small
arrow facing
the edge.
Align
Connecting
Bolt with
Camlock and
join pieces
together.
Turn Camlock
180° clockwise
to lock.
The
long curved
arrow will now
be on the
edge.