1
TOP PANEL PREPARATION
Page 2/8
8.16.07
Place Top Panel (1) on padded surface
with
underside up.
Insert 8 Connecting
Bolts (A) as shown. NOTE: Holes for
Connecting Bolts on outer edges are
the
smaller, inner holes.
Holes for
center Connecting Bolts are
the
smaller, outer holes.
UNDERSIDE
FRONT EDGE
A
A
A
A
1
FRONT EDGE
UNDERSIDE
C
C
C
C
2
FRONT EDGE
A
A
A
A
2
Turn Bottom Panel (2)
over so that
top side is up.
Insert 4 Connecting Bolts (A) into
smaller, holes as shown.
Larger holes will
receive dowels of Vertical Divider Panels (5,6).
Place Bottom Panel (2) on padded
surface with
underside up.
Insert 9 Camlocks (B) as
shown. Insert 2 Dowels (C)
into each edge as shown.
Be sure
small arrow
on Camlock
faces panel edg
e.
IMPORTANT NOTES & CAUTIONS/WARNINGS
• Carefully read and follow these instructions for assembly.
• Please handle parts carefully, some parts may be heavy and can have sharp edges – we recommend pos-
sibly using cloth protective gloves for extra protection.
• To protect the unit and your flooring surface we recommend working on a padded or carpeted area, you
may also use the open box the unit came in for this purpose.
• For proper construction & integrity/assembly and for TV weight support and safety, all connections need to
be sufficiently tight. However, do not over-tighten connections to the point of stripping screw threadings.
Parts are designed to fit together tightly, however, avoid excessive force but rather align & fit panels togeth-
er methodically and with patience.
• For some heavy or large units, it may be recommended for 2 people to work together on this assembly.
• It is extremely important to attach the
BACK PANEL
as instructed within this manual. Such panels are cru-
cial for the stability and structural support of the unit.
• Please read additional
important safety information
at the end of this instruction manual.
• We urge you to keep this manual with your unit for future reference.
2
BOTTOM PANEL PREPARATION
B
B
B
3
FIXED SHELF PREPARATION
On the
underside
of Center
Fixed Shelf (7) insert 4
Camlocks (B) as shown.
B
B
7
Be sure to insert
Camlocks with
the
small arrow facing
the edge.
Align Connecting Bolt
with Camlock and join
pieces together.
Turn Camlock 180°
clockwise to lock.
The
long curved arrow will
now be on the edge.
CAMLOCK/CONNECTING BOLT
PROCEDURE
DO NO T
INSERT
CONNECTING
BOLT
FURTHER
THAN DEPTH
SHOWN.