Elis FLONET FH30xx Series, Инструкции по управлению

Страница: 32 / 33

ELIS PLZEŇ a. s.
Project design, installation and service manual
Page 32 o
f
33
Electromagnetic flowmeters of the type series
FLONEX FXx11x and FLONET FH30xx
Meter control instructions
ELIS PLZE
Ň a. s., Lucni 425/15, 301 00 Plzeň, Czech Republic tel.:+420 377 517 711, fax:+420 377 517 722
Es 90 686 K
Use buttons
▲,▼ in the header of the Log table to select the required archived data
from specific operation periods.

Setting the data archiving parameters (Log, Archiving)

Reading the initial parameter setting (Service)

Deleting the archived data (Service)
2 Variable name
3 Setting of a new variable value. If the field is backlighted, a modification is permitted.
4 Data read from the flowmeter (upon depressing button )
5 Button for one-off flowmeter data reading (data on one display line only).
6 Depress button above the table to read and transfer to program FLOSET 4.0 a complete
group of variables.
7 A click on the envelope button will result in one-off writing of new data into the flowmeter.
This write command will be limited to data on a single display line.
8 Button above the block of variables may be used to write new data for a complete group of
variables into the flowmeter.
9 Symbols assigned to variables:

F the float-type of variable

S a string variable

I the integer-type of variable

E the enum-type of variable

The clock-face symbol: the date-and-time variable
This button is reserved for manufacturing and service operations only. The user may only work with
the backlighted item. Use the button to open
Item editor . Through the backlighted item it is
possible to set values to be written into the flowmeter just as with item 3.
To end the data setting procedure use button Store whereby the system will rewrite the variable
value in the table and store the new value in the flowmeter, or button Close whereby the procedure
will be discontinued and no data changed.
10 A click on button will cause a narrow empty bar to appear right of the button. A click on this
bar will open a dialogue window where the user may define the cycle period for repeated flowmeter
data reading.
This is possible for a single variable only, not with the button associated with reading data from a
complete table.
11 At the bottom of the open window there is a software button READ making possible reading all
variables in a table.
6. DOCUMENTATION AND STANDARDS
Es 90684K Communication interface RS-485 MODBUS RTU
Electromagnetic flowmeters FLONEX FXx11x and FLONET FH30xx
Es 90688K Configuration program FLOSET 4.0