www.elinz.com.au / [email protected] / 1300 881 773
Instructions to use:
•
For best result in using Dash Camera, we definitely recommend to keep
it plug-in into the car cigarette charger. This will allow you to use or
record for a longer period of time. Dash Camera uses a lot of battery
due to G Sensor system of the camera.
• To watch recorded video clips, please remove SD card from Dash
Camera and connect it to your computer or laptop. This will allow you to
watch all videos recorded.
• Please peel off the protective film on the screen before use.
• If you would like to use parking monitor function, please purchase
compatible hard wire kit from our store.
Dash cam is not recording properly, please check:
1. Format the SD card and try again.
2. Change to another SD card and try again.
3. Reset to factory settings under menu.
Under normal operating conditions, please refer to the solutions:
Unable to boot - Check the recorder and car charger if properly connected, if
you manually turned on, check the battery level if it is too low needs recharging.
Press RESET button to restore to the factory settings.
When the camera automatically stops recording, or do not cycle the camera -
Due to the huge high-definition video data, it is possible because the memory
card reader could not keep pace. Please use the high-speed TF card, such as
Class10 high-speed card.
If the loop recording is not working, it is also possible that gravity sensor is open,
the files on memory card are all locked. Close the gravity sensor setting, and the
format the memory card.
