www.elinz.com.au / [email protected] / 1300 881 773
Features
1. Use automatic recording function
Start the car engine. The recorder automatically starts to open the
recording function, the charge indicator lights and video light is blinking.
After switching off the engine, the recorder automatically saves the
contents of the recorded video and shut down. Recorded video segment
is stored in the TF card. When the memory is full, the recorder will
overwrite the earlier recorded image.
Note:
a.
Recording time cycle can be selected in the menu settings ranges from
1 minute / 2 minutes / 3 minutes / 5 minutes / 10 minutes / OFF.
b. Front, rear camera and video camera are recorded separately to the
"MOVIE" and "PHOTO" folder.
2. Use manual recording functions
Press the [OK] key, the recorder automatically starts. Video recording
indicator lights up and blinks. To shut down the power button press [OK]
for 3 seconds, the recorder will automatically save the record again and
shut down.
3. Take photo function
Press OK to pause the video recording, short press the [Mode] button to
enter the camera mode. The upper left corner of the display is converted
to a camera. Press [OK] to take pictures. To switch back to recording mode,
press the [Mode] key twice.
4. Motion detection function
Press OK to pause the video recording, press [MENU] key to enter menu
selection mode to turn on motion detection. When the lens senses a
moving object, the state of the machine will change into camera and when
the lens does not detect any moving objects for 30 seconds, the system
will stop recording. To exit the motion detection mode, long press on the
turn button for 3 seconds to exit the motion detection mode.
