background image

www.elinz.com.au / [email protected] / 1300 881 773 

 

Always unplug device by the plug. The cable may be damaged. 

 

Do not use device if damaged. Damage to the power cable, the device 
or the charging cable increase the risk of electrical shock. 

 

Do not attempt to disassemble or repair the device. Immediately 
have a defective device or damaged power cable repaired or replaced 
by a specialty shop. 

 

Risk of short circuits! Do not allow the two connectors from the 
charging cable to touch if the power plug is plugged into the power 
outlet. Be sure not to connect the connectors or the battery poles 
through conductive objects (e.g. tools). 

 

Never use the cable to carry or pull the device. 

 

 Risk of Injury! 

 

Never attempt to charge non-rechargeable, damaged or frozen 
batteries. 

 

Do not use this device to charge dry cell batteries. These could burst, 
resulting in personal injury and property damage. 

 

Please read and follow the operating manual and all safety 
instructions for the batteries to be charged and the vehicle before 
using this device. 
 

 Risk of damage! 

Never place the device over or near the battery to be charged. Gasses 
from the battery could damage the unit. Place the device as far from 
the battery as the connecting cable will allow.  

Never operate the device if it has been dropped or damaged in any 
other way. For inspection and repair, take it to a qualified electrician. 

Содержание BCSMART20









Отзывы: