www.elinz.com.au / [email protected] / 1300 881 773
Operation
Before use
Before connecting the charger, the operating instructions must be
observed. Furthermore, the instructions of the vehicle manufacturer
regarding a permanently connected car battery must be observed.
Secure the car, switch off the ignition. Clean the battery poles. Take
care that while doing so, your eyes do not come into contact with the
dirt.
Ensure sufficient ventilation.
Connecting
Connect the "+" pole clamp (red) of the charger to the "+" pole of the
battery.
Connect the "-" pole clamp (black) of the charger to the "-" pole of
the battery.
Connect the main cable with AC 230V VDE plug of the charger to the
main socket.
Before start charging, please press the Button
to select with
mode you want.
Then press the Button
. The charger to start to work.
If you want to stop charging, please press the Button
.
The battery voltage display shows the current battery voltage after
connecting.
If the connecting is "Reverse" or "Short Circuit", "Err" will be displayed
on the screen.
The charger can automatically recognize and choose 12V or 24V after
connecting.
LCD display can automatically show the percent of voltage.