EN
15
User Manual
Press 7x
Scroll to change value
Set the Pilotlight LED Timer between
1..60 seconds
Press more than 3 s
To deactivate the Timer for continuous
Pilotlight, press this touch more than 3 s.
Note: Continuous Pilotlight will consume
Battery energy. The number of flashes
will be reduced
special fUncTions
Press 8x
Scroll to change value
1/10 flash power steps per push
Standard setting
2/10 flash power steps per push
3/10 flash power steps per push
4/10 flash power steps per push
5/10 flash power steps per push
1/1 flash power steps per push
Press 8x
Press 1x
Scroll to change
value
After approximately 2 seconds the unit
returns from the “Setup Menu” to normal
display mode. All configurations are
stored automatically.
After approximately 5 seconds the unit
returns from the “Setup Menu” to normal
display mode. All configurations are
stored automatically.
piloTligHT led -on- TiMe
flasH power sTeps per pUsH
aUTo reTUrn froM MenU To norMal display Mode
noTe aboUT Hidden MenUs
Some Quadra menus are dedicated for servicing or manufacturer needs, they do not add any user
function. If the display shows the information below: « U x » where x is « 0..3 » or « Ud » or « t00 »,
press immediately the ON / OFF (1) key to leave this menu
, otherwise your device would not
work correctly if parameters are changed.
