51
English
Appendices:
B1 Clearing the turbine
If the turbine is blocked, it can be cleared as follows:
• Turn off the engine.
• Open de shredding chamber.
• Loosen the auxiliary tools to the left of the machine by
removing the star screw.
• Open the small cover of the belt protector on the right of the
machine.
• Place the sleeve of the auxiliary tool over the end of the axle
in the hole of the belt cap and turn the impeller until it comes
loose.
• Remove any chips from the turbine that caused the blockage.
• Pull the help tool from the hole after removal of the blockage
and close the cover plate.
Caution:
Always remove the auxiliary tool from the axle and return it to its original
position before restarting the machine.
