31
English
•
Make sure to properly secure the machine to the vehicle during transportation. The following
locations can be used:
- the wheel axis at the rear
- the steering handle of the machine
- the chassis of the machine
- the hook at the top of the machine (rental model with
tank at the top)
- the openings located at the sides of the tank (rental
model with tank at the top)
• Always attach the machine firmly to solid anchor points
on the vehicle.
• Use only attachment materials that show no signs of
wear or frailty.
• Always attach the machine at four points to allow for enough tension in all directions, thus
ensuring that the machine cannot move during transport.
Rental model with the tank at the top:
• A lifting eye is provided so that the entire machine can be lifted with the help of a crane.
• Lift the machine with the engine turned off only.
• Before attaching the hook in the eye, check that the bolt of the tank holder is securely
tightened.
• Ensure that the hook fits through the eye completely and secure it to prevent it from coming
loose during lifting.
• Ensure that the lifting attributes are standardised, that they are appropriate for the weight of
the machine and that they were inspected recently.
• Lift the machine at low speed and avoid sudden acceleration and/or slowing down.
• Stay at a safe distance during lifting and never place yourself under the load.
• Never lift the machine during a storm or high winds.
• Empty the fuel tank first if the machine cannot hang level during lifting and could leak petrol.
• Never tilt the machine more than
12° when transporting the chipper; the machine might flip
over backwards otherwise.
• Ensure that the vehicle/trailer is not overloaded. The chipper has a net weight of
approximately 136 kg.
