
25
English
Caution :
Once the engine is running, the shredding knives are rotating, therefore,
irrevocably shredding anything that is introduced into the loading hopper.
9.6.2 Shredding proper
• Be careful when performing work.
While operating the machine, focus your con-
centration completely on the work.
• Drive the machine to the work site.
• Open the back cover (1). This enables you to
make a larger pile of chippings.
• Start the engine (if you didn’t already do this,
Chapter 9.4).
• Allow the machine to run idle for about 5 minutes.
• Move the throttle control lever to full throttle.
Warning :
Remember : When shredding at temperatures around freezing,
maximum branch size of branchy material is limited to 70 mm.
For your information :
Always shred at full throttle for the engine to produce its full power output.
• Move the control lever to the centred position (position 2). The
feed roller starts to turn and pulls the garden waste into the loading
hopper at a constant speed. The maximum lift of the feed roller is
120mm.
• Preferably, the operator’s position is next to the black loading
hopper to introduce the garden waste. In this way, flying chippings
finding their way from below the safety screen that are expelled from
the in-feed do not cause personal injury.
• Feed the garden waste into the loading hopper and guide it towards the feed roller. In the case
of loose garden waste (leaves, etc.), use a branch to push the material up to the feed roller. (DO
NOT USE a shovel or a fork to do this).
• Never use a step for feeding the loading hopper with garden waste.
• No attempt should be made to use your feet to push garden waste in the loading hopper.
Содержание MA 006 010 113
Страница 1: ...Superprof M A N U A L...
Страница 2: ...2 English...