ELICA LIB0099060A, Инструкция по использованию, уходу и установке, Страница: 8 / 36

8
• Attach the lower horizontal support to the hood with
8 - 4.2 x 8mm screws.
• Attach the middle horizontal support to the hood with
8 - 4.2 x 8mm screws.
• Attach the 4 upper vertical supports to the hood with
16 - 4.2 x 8mm screws.
• Attach the assembly to the support fixed on the ceiling.
Assure it with 16 - 4.2 x 8mm screws.
Mounting the
range hood blower
1. Slide the rear mounting plate flange under the bracket.
A
B
A. Bracket
B. Blower mounting plate
2. Push the front end of the mounting plate up and snap into spring
tab.
NOTE: The spring tab should be outside of the slot in the mounting
plate.
A
B
A. Blower mounting plate
B. Spring tab