ELICA KIT0179549, Инструкция по использованию, уходу и установке

Страница: 5 / 44

5
Tools and parts
Gather the required tools and parts before starting the
installation. Read and follow the instructions provided with
any tools listed here.
Tools/Materials required
• Drill
• 1
1
⁄
4
” (3 cm) drill bit
• 3
⁄
16
” (0.5 mm) drill bit
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers
•
Phillips
•
Flat-blade
Parts not supplied
• 6 AWG wires, one each of the following colors: black, white,
red, blue, gray, and green/yellow (ground)
NOTE: The length of the conduit and AWG wires is
determined by the distance between the in-line blower
motor and range hood terminal boxes.
• 11 - UL listed wire connectors.
Parts supplied
Removing parts from the packages. Check that all parts are
included.
• Shell for blower motor assembly
• Hardware bag with:
Supplied Part Pieces Supplied Part Pieces
Strain relief connector (13.5)
2
6.5 X 3.5 mm screws
10
4.2x8 mm screws
33
Ø 12 mm strain relief
1
6-wire blower connector
1
6x13.5 mm
2
4x1.8mm flat washers
4
Torx adapter
(T10)1
(T20)1
Spring tab
1
Clip nuts
4
6.3 x 60 mm screws
7
Strap 2.5x 95 mm
3
Support bracket
1
6 x 16 mm screws
4
10x50 mm wall anchors
7