ELICA GETUP BLGL/A/90, Инструкция по монтажу и эксплуатации

Страница: 34 / 204

13
parameters (the button will turn off) and repeat the
configuration procedure.
•
WiFi activation/deactivation: after the configuration, it is
possible to deactivate/activate the WiFi function. Press for
about 2 seconds to deactivate/activate the WiFi function.
Deactivating the function does not cause the loss of the WiFi
parameters.
WiFi status table
WiFi button Device connection status
Light off WiFi not configured or off
Light on steady WiFi connected
Light flashing fast
Attempt to connect to the
WiFi router
Light flashing
slowly Attempt to connect to the
Elica cloud
Light on with short
flashing light
Remote command being
received (e.g. engine
ignition or light turned on)
Control Display B
T1.
Light ON/OFF button
T2 . Decrease intake speed / motor off button
L1. Speed indicator LED on
T3. Motor on / increase intake speed button
T4 . "BOOST” – intensive speed - function button
T1:
Light ON/OFF button
to turn the light on and off.
Press and hold button T1 to increase / decrease the intensity
of the light.
T2: Decrease speed / motor off button
press the decrease the intake power, until the extractor hood
is turned off.
press and hold to turn the hood off directly.
L1:
Speed indicator LED on
the central LEDs light up according to the intake speed
active/used:
1st speed, LED
a will light up
2nd speed, LEDs a+b will light up
3rd speed, LEDs a+b+c will light up
T3: Increase speed button
press to turn the hood on
press to increase the intake power.
T4: "BOOST” – intensive speed - function button
press T4 to activate the intensive intake speed “ BOOST 1 ”,
timed for 30 minutes
this prolonged timing has been designed to guarantee a
suitable cooking time for preparations that release high
amounts of smoke during cooking
Note: after the 30 minutes, the hood will go back to the
previously set intake speed ***
with the motor on “BOOST 1”, press
T4 again to activate the
intensive intake speed “ BOOST 2 ”, timed for 7 minutes
Note: after the 7 minutes, the hood will go back to the
previously set intake speed ***
Note: press T4 again, during the 7 minutes, to go back to the
previously set intake speed ***
with the “
BOOST1” and “BOOST2” functions active , press:
T2 to go back to the previously set intake speed ***
T3 to go back to the 3rd intake speed
*** the previous intake speed remains visible via the indicator
LEDs
L1
if you have set the intensive speed directly with the hood off,
the motor will be turned off after the set time.
While using the “
BOOST ” functions, the T4 symbol flashes
(“BOOST 1”: white light - “BOOST 2”: blue light)
Filter Saturation indicator lights
At regular intervals, the hood signals the need to perform
maintenance on the filters.
LED
L1 (a-b-c) on and flashing light (all indicator lights
flashing together): perform maintenance on the grease filter.
LED
L1 (a-b-c) on and alternating light (the indicator lights
turn on in sequence): perform maintenance on the active
carbon filter
Note:
The filter saturation indicator is visible within the first 10
seconds on turning on the hood; the saturation indicators must
be reset within this time.