17
is not activated.
In order to activate the charcoal filter
saturation indicator, press buttons
E
and
F
simultaneously for 3 seconds.
Initially, only letter
F
will be displayed,
then after the 3 seconds have passed,
letter
C
will be displayed as well,
indicating that the carbon filter
saturation control system is active.
To switch off the system, re-press the
same two buttons: letter
C
appear on
display and after 3 seconds it
disappears and the device will be
switched off.
E
- Knob to decrease the speed: from
boost speed
P
to speed level
1
.
F
- Knob to increase (standby) speed to
boost speed
P
.
Attention! Boost speed
P
lasts 5
minutes after which the cooker hood
automatically sets the speed to level
2
(suction power).
Controlling the range hood with
sliding glass:
Closing the glass, all selected speed and
lights switched off.
Hood retains last speed (except P-boost-
speed) setting when glass is closed and re-
opened.
If the hood fails to operate correctly, briefly
disconnect it from the mains power supply for
almost 5 sec. by pulling out the plug. Then
plug it in again and try once more before
contacting the Technical Assistance Service.
Warning!
Always press the fan off button
A
before
disconnecting the hood from the mains
supply.
Reset filter saturation signal
Press knob
B
for about 3 seconds.
The letter
F
and/or
C
will disappear from the
display.
Содержание EGL430
