Eli User Guide
Getting to know Eli
Eli’s ports, including all cables connections, are located on the rear panel of the unit.
Back panel
Eli’s ports and switches
On
Enables traffic to flow through WAN (Wide Area Network – the
Internet) port
Standby
Off
Disables all traffic through WAN port
Eth
Sets WAN port to be used as a 10/100 MBit port.
Use this setting if you plan to use Eli behind a router or cable
modem.
WAN SW
ADSL
Set WAN port to be used as a DSL modem port.
Use this setting if you plan to replace your existing DSL
modem with Eli.
Reset
Reset switch. Reboots Eli.
Use a pen or other small tool to depress the recessed reset
button.
LAN 1-4
These 4 LAN (Local Area Network) ports connect to network
devices, such as PCs, print servers and remote hard drives.
Use a straight Ethernet network cable to connect your PC to
one of these ports.
Device
Use as a network adapter (future expansion)
USB
Host
Use to hook a printer to use over the network.
Eth/ADSL
Connect this port with a straight Ethernet network cable to
your router if you plan to use Eli behind a router.
WAN
ADSL
Connect this port with a telephone cable to your telephone
jack if you plan to replace your DSL modem with Eli.
Port
The Power port is where you will connect the power adapter.
Be sure to connect the power cord to the power adapter
before plugging it in.
Power
Switch
Power switch to switch on Eli.
TEST.doc
16 March 2005
3
