46
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
a
a
n
n
u
u
a
a
l
l
(3) Message On Printing
Message
Cause
Remedy
NO PAPER
Empty printer paper.
Replace the printer paper.
(refer to ‘12.2 Replacement of printer paper’)
12.2
Replacement of printer paper
If a red line appears on the paper, or if ‘NO PAPER’ message is displayed on the screen bottom,
please replace printer paper with new one.
[Drawing 32 ] Replacement of printer paper
a. Rotate the joystick clockwise to lift up the body, and then open printer cover.
b. Insert the printer paper from below to the insert slit or the black printer unit, and then push it up
softly. Keep the lid of the printer unit closed while inserting. The paper will be drawn in
automatically. Make sure the printable side (smoother side) faces downwards at the insert
c. Insert the end of paper (which comes out from the printer) into he slit of the printer cover, then
close the cover
※
If paper was not inserted enoughly, pull it by hand.
※
Please check paper type and size.
(Paper type: Thermal Paper, Size: Width 57mm / External diameter 50mm)
12.3
Replacement of chinrest paper
a. Pull out 2 holding pins on chinrest.
b. Insert holding pins into the hole on chinrest paper. (More than 50pcs available)
c. Insert 2 holding pins into the hole on chinrest.
12.4
When Moving the Instrument
a. Turn OFF the power switch.
b. Disconnect the power cable
c. Close the stage holding dial in the clockwise direction
d. Move this machine holding the lower part of the mains to keep horizontally.
Insert
Position
