12
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
a
a
n
n
u
u
a
a
l
l
3. Prerequisites for safety
1.
Preparation before use
-. Do not operate under direct sunlight or too strong lights
-. Do not store alchol, thinner and other flammable vapors and liquids in the vicinity
of this equipment.
-. Check the voltage.
-. Check printing papers are ready
-. Check chin rest is working properly
-. Remove dusts, especially on the lens.
2.
Preparation when you use
-. Place this equipment plain
-. Do not put objects on top of this equipment.
-. Do not disassemble or modify on your own
-. Stand 40 minutes and get it worked if it is stored at extended temperate place
-. Keep it away from other persons but qualified technician.
-. Be sure to unplug if do not use long.
-. Do not turn off the instrument before finishing initialization.
(Don’t power off during loading)
3.
Instruction and operation sequence
-
. Plug into its’ own electrical oulet.
-
. Press “ON”
-. Put the chin on chin rest and make forehead stuck on to forehead rest
-. Release stage by turning stage knob
-. Press buttons what you want
-. Try to get it worked as per the instructions of 4 and 5
4.
Storing after use
-. Cover it up and unplug if do not use long
-. Clean with soft cloth, soaped and rinse, wipe dry
-. Wipe lens and
glass’ dusts out with windblower and with soft cloth.
-. Fix by turning the fixation knob and keep it plain when you are about to move or lift up
-. Do store at the following place
1. Not humid place
2. Not in the vicinity of water
3. Not dusty and not in the vicinity of filthy place with salt or sulphur
4. Plain place
5. Not in the vicinity of vibration or shock
6. Not in the vicinity of other flammables vapors or liquids
7. Not in the vicinity of direct sunlight
-. Store the accessories and cords for next operation.
