ELGO Electronic GMIX2 Series, Руководство по эксплуатации

Страница: 17 / 24

Installation and First Start-Up
- 17 -
7.4 Mounting Direction
On the underside of the sensor there is a sticker which signals the magnetic
tape side with the active sensor areas. In addition, the
 -marking indicates the
positive counting direction.
7.5 Alignment of the Sensor to the Magnetic Tape
For linear applications with a magnetic tape, the center of the sensor is aligned to the center of the magnetic
tape. Both active sensor areas (see red hatched surfaces in the figure below) must be guided over the tape at the
permitted distance up to a maximum of 4.0 mm.
Figure 8: Alignment of the sensor to the magnetic tape
NOTE!
Please make sure that the mounting tolerances (see section

7.3.1) are observed.
max. 4.0 mm
Magnetic tape
Mounting surface
Cable outlet
approx.
1 mm
Sensor center = magnetic tape center
19
26.5
14.5
22
2 active sensor areas
Side view:
Top view: