ELGO Electric AZ16I series Скачать руководство пользователя страница 14

Страница: 14 / 14

10. Liability exclusion / Guarantee

We have checked the contents of this instruction manual carefully, to the best of our knowledge

and belief for conformity with the described hardware and software. Nevertheless errors, mis-

takes or deviations can not be excluded, therefore we do not guarantee complete conformity.

Necessary corrections are included in the subsequent editions.

We appreciate your ideas and improvement suggestions very much.

Reprint, duplication and translation, even in extracts, are only allowed with a written authoriza-

tion by the company ELGO Electric GmbH. Our objective is to improve our products constantly,

ELGO Electric does not assume any liability for possible errors or mistakes.

The guarantee period is to two calendar years from the date of delivery and includes the deliv-

ered unit with all its components. ELGO Electric GmbH will at its option replace or repair without

charge defects at the unit or the included parts, verifiable caused by faulty manufacturing

and/or material in spite of proper handling and compliance to the instruction manual.

Damages verifiably not caused by ELGO-Electric GmbH and due to improper handling are ex-

cluded from any guarantee e.g. by applying faulty voltage, diffusion of liquid into the interior of

the engine, using force, scratching the surface, chemical influences etc.!

Subject to modifications © ELGO Electric GmbH 2006

Содержание AZ16I series















Результаты поиска

Содержание AZ16I series

Отзывы:

Похожие инструкции для AZ16I series

Бренды по названию

Популярные бренды

ELGO Electric AZ16I series, Руководство по установке

Результаты поиска

Содержание AZ16I series

Отзывы:

Похожие инструкции для AZ16I series

Бренды по названию

Популярные бренды