ELGi TRC 1000 MN UG, Руководство пользователя, Страница: 3 / 81

3
Operate compressor at the rated voltage
Operate the compressor at voltages specified on their nameplates. If using
the compressor at a higher voltage than the rated voltage, it will result in
abnormally fast motor revolution and may damage the unit and burn out
the motor.
Never use a compressor which is defective or
operating abnormally
If the compressor appears to be operating unusually, making strange noises,
or otherwise appears defective, stop using it immediately and arrange for
repairs by a authorized service center.
Use only genuine replacement parts
Replacement parts not original may void your warranty and can lead to
malfunction and resulting injuries. Genuine parts are available from your
dealer.
Do not modify the compressor
Do not modify the compressor. Always contact the authorized service
center for any repairs. Unauthorized modification may not only impair the
compressor performance but may also result in accident or injury to repair
personnel who do not have the required knowledge and technical exper-
tise to perform the repair operations correctly.
Turn off the starter stop button to be latched
when the compressor is not used
When the compressor is not used, disconnect it from the power source
and open the drain cock to discharge the compressed air from the air tank.
Drain tank
Drain tank daily or after 4 hours of use. Open drain fitting and tilt
compressor to empty accumulated water.
Dress properly
Do not wear loose clothing or jewellery. They can be caught in moving
parts. Wear protective hair covering to contain long hair.
Maintain compressor with care
Follow instructions for lubricating. Inspect cords periodically and if
damaged, have repaired by authorized service facility. Inspect extension cords
periodically and replace if damaged.
Safety instructions