ELGi TRC 1000 MN UG, Руководство пользователя

Страница: 20 / 81

20
Radial sample
readings
Angular sample
readings
Motor position as per radial
reading
Remarks
Reading taken from this view
CORRECTIVE ACTION 1
.
V
ertical shift (0.2 TIR) is within the limit
no need to add shims.
2
.
Horizontal shift within the limit [+0.12+(-0.4)=0.52mm] still you can adjust the misalignment. T
o
adjust shift
motor by side screws towers right, by keeping a close watch on dial gauge reading till dial gauge reading reduces to +0.26
3
.
T
o
adjust the angular shift it’
s required
to rotate the motor towards left by keeping the bolt no ‘2’ fixed, loosing bolt no1,3&4 and by pushing the side screw at bolt number 3, keeping a close watch on dial gauge reading till dial gauge reading reduces to ‘0’.
Add shim here
1.
T
o
adjust angular (1.5) and radial shift
(1.8 TIR), add shims at front foot.