Elgento E14024, Инструкция по эксплуатации

Страница: 7 / 12

7 www.elgento.co
USING YOUR APPLIANCE
Lid Assembly:
Assemble your lid as per the diagram below:
When tightening the screw, be careful not to
over-tighten as this may crack the glass lid.
1. Screw
2. Metal washer
3. Silicon ring
4. Glass lid
5. Plastic mount
6. Plastic handle
Before connecting the power supply:
1. Clean the inner and outer surface of
the appliance with dry cloth before use,
especially the plug and the cool touch
handles to avoid electricity shock.
2. Insert the temperature regulator to the
appliance body; make sure it is fully
connected otherwise the temperature
rise will be affected, and the temperature
regulator will be damaged because of
overheating.
3. Turn the regulator dial counter-clockwise
to the off position before connecting the
power.
4. Connect the power supply, turn the
regulator dial clockwise, and the indicator
lamp will illuminate.
5. You can adjust the temperature according
to your needs during cooking.
6. Turn the regulator dial clockwise to turn
the heat from OFF to maximum.
7. Turn the regulator dial counter-clockwise,
and heat will go from Maximum to the
OFF.
CAUTION:
Do not cover the appliance with the
lid when heating up the cooking oil.
Preparing foods:
• Brush the pan with a little cooking oil.
• Set the temperature regulator to the
required heat level.
• The control lamp will light up to signal that
the unit is ready for use (ON).
Heating
levels
Temperature
C°
Food type
1 & 2 100 C° Roasted food,
meat, etc.
3 & 4 150- 200 C° Pancakes,
scrambled eggs,
bacon, etc.
5 240 C° Grilled foods,
pizza, etc.
• The control lamp will light up to signal that
the unit is ready for use (ON).
• It takes 5-10 minutes after the unit is
switched on before the control lamp goes
out. You can then start cooking the food.
• Once cooking is complete, the unit
can be kept warm. To do this, set the
temperature regulator to the thermostat
level to setting 1.
1 2 3 5
4
6