ELGA PURELAB Prima 15, Руководство оператора, Страница: 6 / 34

PURELAB Prima 7/15/30 Operator Manual ELGA
Page 2 PURELAB Prima 7/15/30 Version 01 09/08
2. HEALTH AND SAFETY NOTES
PURELAB Prima products have been designed to be safe, however,
it is important that personnel working on these units understand any
potential dangers. All safety information detailed in this handbook is
highlighted as WARNING and CAUTION instructions. These are used
as follows:
WARNING! WARNINGS ARE GIVEN WHERE FAILING
TO OBSERVE THE INSTRUCTION COULD
RESULT IN INJURY OR DEATH TO
PERSONS.
CAUTION! Cautions are given where failure to
observe the instruction could result in
damage to the equipment, associated
equipment and processes.
2.1 Electricity
It is essential that the electrical supply to the PURELAB Prima is
isolated before any items are changed or maintenance work
performed.
The ON/OFF switch is located at the left-hand side of the unit. The
mains power lead is located just behind the ON /OFF switch.
WARNING! THIS APPLIANCE MUST BE EARTHED.
2.2 Pressure
The main water supply pressure should be isolated and residual
pressure released prior to removal of any cartridges or carrying out
work on the unit.
Switching off the electrical supply will isolate the source of pressure,
but pressure trapped within the unit should be released.
2.3 Sanitization Chemicals
During the sanitization cycle a CT1 sanitization tablet is used and
relevant safety information is included in this handbook. A safety data
sheet conforming to COSHH regulations is also provided with the
tablets and should be read before the tablet is used.
2.4 Control of Substances Hazardous to Health (COSHH)
Material safety data sheets covering the various replaceable
cartridges are available upon request. Contact your local supplier or
distributor.
Fuse
ON/OFF
switch
Mains power lead
Mains power socket
Mains Power Supply