MEDICA EDI 15/30
Operator Manual
ELGA
Page 2
MEDICA EDI 15/30
Version 1 05/16
2. HEALTH AND SAFETY NOTES
MEDICA EDI 15/30
products are designed to be safe, however, it is
important that personnel working on these systems understand any
potential dangers. All safety information detailed in this handbook is
highlighted as WARNING and CAUTION instructions. These are used
as follows:
WARNING!
WARNINGS ARE GIVEN WHERE FAILING
TO OBSERVE THE INSTRUCTION COULD
RESULT IN INJURY OR DEATH TO
PERSONS.
CAUTION!
Cautions are given where failure to
observe the instruction could result in
damage to the equipment, associated
equipment and processes.
2.1 Electricity
It is essential that the electrical supply to the
MEDICA EDI 15/30
is
isolated before any items are changed or maintenance work
performed. The ON/OFF switch is located on the left hand side of the
system. The mains power lead is located just behind the ON/OFF
switch.
WARNING!
ONLY USE THE APPLIANCE COUPLER
(MAINS LEAD) SUPPLIED. THE USE OF
THIS WILL ENSURE ADEQUATE EARTH
PROTECTION IS PROVIDED.
WARNING!
IF THE EQUIPMENT IS USED IN A
MANNER NOT SPECIFIED BY ELGA, THE
PROTECTION
PROVIDED
BY
THE
EQUIPMENT MAY BE IMPAIRED.
WARNING!
ALWAYS
ENSURE
THAT
THE
ELECTRICAL
POWER
SUPPLY
IS
ISOLATED BEFORE WORKING INSIDE
THE PRODUCT.
2.2 Pressure
The mains water supply pressure should be isolated and residual
pressure released prior to removal of any cartridges or carrying out
work on the system.
Switching off the electrical supply will isolate the source of pressure,
but pressure trapped within the system should be released by opening
the dispense tap until water flow stops.
Mains Power Supply