Manual operating of flash lamps FX PRO serie
www.elfo.com.pl
Page 3
I.
Introduction
FX PRO flash lamps come from highest utilitarian properties line of our products. These
lamps have been especially designed for demanding photographers who think highly of
comfortable work and simplicity of maintenance alike.
They are characterized by reliable repeatability of parametres and settings due to digital
technology applied. FX PRO lamp construction has been based on proven solutions that
come from Quant flash lamps. Cooling system has been modernized the most. Lamps have
been equipped with fan and strong, halogen modelling lamp as well. Front panel has been
changed thoroughly but readable LED display is still the same. Lamps are equipped with
popular accessories fastening system Bowens type.
II.
Purpose
The lamps are intended for all professional photographers. They were especially
designed for photo studios needs that do portrait and occasional photos. They also may
successfully be used as an additional equipment for advertising photography due to high
parametres of utilisation.
Fastening system Bowens type enables any accessory to be mounted. Wide range of
accessories is available.
III.
Features
FX PRO serie gives more advanced functions and enhanced technique than Quant at
comparable price. The flash energy can be set over the range of 6f with the high accuracy of
1/10 f-stop. There is advanced system of strong, halogen modelling light to be controlled.
The convenient element is an possibility the readiness for work to be selected, in order to
increase comfort of maintenance. Automatic energy dumping system allows the flashtube
life to be extended, and let the work comfort to be better too. Digital display allows the
relative energy value to be shown precisely (by 1/10 f-stop), and makes the values to be read
distinctly
.
There is new model of flashtube applied. Flashtube and halogen bulb are shielded by
frosted glass casing. For that reason photographer can get perfect proportion between flash
and modelling light. Two sources of light inside the casing, shines if they were placed in one
place.It is important if accessories like reflectors, honeycomb or snoot are in use. Sticked out
flashtube allows the light to be diffused better.
Digital, rotary encoder was applied for energy to be controlled.
There is possibility to
link up external control panel that takes over all functions and settings, including energy, and
make them be available to be controlled from panel, instead of front of the lamp.
All settings of the lamp can be latched (except flash), in order to avoid undiserable
settings changes
External control panel is an optional equipment and standard lamp doesn’t
include this one. There is one type of control panel that detects determined
type of the lamp, and adjusts for it automatically
