32
Owner's Manual
31
Owner's Manual
CCD : Enable/Disable
Closed captioning is available on both Digital and Analog channels but only if
the Broadcaster is providing CCD information in its transmission. If CCD is
enabled then the user can select the desired CCD mode and the TV will
display the CCD text provided by the Broadcaster on the screen. The user may
select the desired CCD mode by repeatedly pressing the ENTER/CC button on
either the front panel or the infrared hand unit. The first press of this button will
display the currently selected CCD mode. Each subsequent press while the
CCD mode is being displayed will cause the mode to be changed in the
sequence shown in the graphics below. The display will be removed from the
screen several seconds after the user stops pressing the ENTER/CC button.
The setting selected when the display is removed will be remembered. Digital
and Analog channels have different CCD modes and each is selected and
remembered separately. The exception to this is that selecting OFF for either
Digital or Analog will change both modes to OFF. If CCD is disabled then both
CCD modes will be set to OFF and pressing the ENTER/CC button will not
cause the CCD mode to be displayed or changed.
On Analog channels the possible CCD modes are displayed for selection in
this order.
On Digital channels the possible CCD modes are displayed for selection in this
order.
To change the CCD Enable/Disable
Select (CH
) CCD
Press VOL+/- to make the selection change. The ON setting enables the
CCD feature.
H
ow do I change the features of the TV?
Off
CC1
CC2
Text1
Text2
Rental
Rental is used to select which method is enabled to allow the user to “self rent”
the TV if the TV Representative is not available. Self rent is only possible if the
TV is in the FREE Service Level. If the TV is “self rented” the TV is switched to
the Basic Unpaid Service Level.
If Rental: Menu is selected, patients start the rental process by pressing the
MENU button on the TV control panel or on the infrared hand unit.
If Rental: Earpiece is selected, the self rent process begins when an earphone
or head set is inserted into the EARPHONE jack on the front of the TV.
Selecting Rental: Ear and Menu makes it possible to self rent using either one
of the above options.
To change the "self rent" options ...
Select CH
Rental to change these "self rent" options.
Press VOL
to select either Menu or Earpiece or Ear and Menu.
Computer : Off/On
The L-10D ELF Television can be programmed and controlled by a computer
system or a quick programming device. Set the computer to "on", even when
the TV does not have a computer module installed.
The only reason to set the Computer to OFF is if a computer module is
installed but it is not working properly.
Aspect : Enable/Disable
Aspect is functional only on Digital Channels. If Aspect is enabled this feature
is available to the user by pressing the
just to the left of the ENTER/CC or by
pressing the ASPECT button on the infrared hand unit . Pressing the button
once will cause the aspect of the displayed picture to change. Three different
settings are possible and the user can pick the one most pleasing to them.
If Aspect is disabled then pressing the buttons will not affect the picture.
Note: It is not recommended that Aspect be enabled unless the the front
panel overlay properly labels the
button. Standard TVs do not label
this button.
To change the Aspect Enable/Disable
Select (CH
) Aspect.
Press VOL+/- to make the selection change. The ON setting enables the
Aspect feature.
H
ow do I change the features of the TV?
Full Screen
Letter Box
Horizontal Zoom
Off
service1
service2
service3
service4
service5
service6