The previous contents of the Master Map are
cleared before the scan begins. The Auto Scan
process can take many minutes to complete
depending on how many TV channels are found.
At the conclusion of the Auto Scan a message
will appear that indicates the Channel Maps are
being updated. The update may take a minute
or more depending on how many channels were
found during the scan.
Note: if the Auto Scan process is terminated
early by the use of the the SETUP or EXIT buttons
then only those channels which have already been
identified will be present in the Master Map.
Note: The contents of the Channel maps may be
altered by the activation of the Auto Program
function. Any channel which is not in the new
Master Map will be removed from all Channel
Maps. If a channel which was not in the previous
Master Map is present in the new Master Map
then it will be added to all Channel Maps.
Any channels in Channel Maps which are still
present in the new Master
Map will not be affected by doing an Auto Scan.
26
Owner's Manual
25
Owner's Manual
H
ow do I set What Channels the User May view
When selecting “Air” only Air channels are scanned.
(both Analog & Digital)
When selecting one of the “Cable” selections only Cable channels are
scanned. (both Analog & Digital)
If the type of TV signal supplied to the TV (Air or Cable) is changed
Auto Scan should be activated to record the channels available on
the input.
An Air signal is transmitted via VHF/UHF over the air, analog is NTSC and digital
is ATSC with a VSB modulated signal.
A Cable signal is cable transmitted signal, analog is NTSC and digital is SCTE
with a QAM modulate signal.
Note: If the Remove Scrambled scan has been performed since the TV was
Auto Scanned then one additional line will be displayed on the ADD/DELETE
CHANNELS screen. This additional line will contain one of the following two
sets of text F1- Show Scrambled or F1- Hide Scrambled. When the message
displayed is F1- Show Scrambled the CH
buttons will skip any channels
which have been remembered as scrambled. When the message displayed is
F1- Hide Scrambled the CH
buttons will display all channels in the Master
Map including any which are remembered as scrambled.
DTV Menu
The “Channel Set up” menu active and
“DTV Menu” select.
Press the ENT to accept this selection.
The “Set up” menu is displayed.
Channel Auto Scan
The “Channel” select, then ENT pressed.
The Ch” menu is active.
The Auto Scan” select, then ENT pressed.
The “Memorize” menu is active.
Press CH
to select the proper setting which
reflects the type of TV signals being provided
to the TV. In most cases this will either be
“Air” or “Cable Auto”.
Press ENT to activate the selection.
A YES/NO confirmation screen will be presented.
Press ENT to begin the Auto Scan process.
The TV will begin scanning for all Digital and
Analog channels on the input signal. The progress
of the scan is displayed on the screen along
with the number of channels which have been
placed in the Master Map. All channels found
during this search will be stored in the Master Map.
H
ow do I Set What Channels the User May view.