30
Owner's Manual
To change the Features of the TV
1. Press SETUP on the infrared hand unit.
2. Press CH
to select Features.
3. Press ENT to accept this selection.
4. Press CH
to select a Features option.
5. Press VOL
to change the selected
Features option.
Marquee
A Marquee channel is a channel which contains an informative or promotional
message.
The content is on the selected channel before the TV is installed in the
hospital. The messages are used to inform viewers and to advertise services.
When a Marquee channel is programmed to a selected service level, it is
always the first channel to appear when the TV is turned on.
To assign a Marquee channel to a level of service ...
Select CH
Marquee.
Press ENT to accept this selection.
Select CH
to select a service level.
Enter the number of the Marquee channel on the digit keys of the infrared
hand unit, to assign it to this selected service level. The channel number
now appears beside the selected rental service and the TV tunes to this
channel as confirmation of the selection.
To turn off the Marquee channel, enter channel 0.
29
Owner's Manual
Speaker
When the speaker is turned off, viewers can hear the TV only with an
earphone or a head set. The speaker may be turned on in some levels of
service and turned off in others.
To turn the speaker on and off ...
Select CH
Speaker.
Press ENT to accept this selection.
Press CH
to select a service level.
Press VOL
to turn the speaker off or on.
Remember, if you connect a head set or earphones to the EARPHONE jack,
you will only hear through this listening device, even when the speaker is on.
The TV will display this reminder, "earphone only" for a few seconds after a
channel change to indicate the speaker is not available. Once the listening
device is removed from the earphone jack, the sound will come from the TV
speaker, providing the speaker has been programmed "ON" in that service
level.
H
ow do I change the features of the TV?
Program Guide : Enable / Disable
The program guide is only available on Digital channels and then only if the
Broadcaster provides this information in the digital data stream. The program
guide is intended to provide information about the current and upcoming
programming on the digital channel which is being displayed. If Program Guide
is enabled this feature is available to the user by pressing the < arrow button on
the left side of the TV or by pressing the GUIDE button on the infrared hand
unit .
Pressing the button once will cause the guide to be displayed and pressing it
again will remove the guide. If Program Guide is disabled then pressing the
buttons will not display the guide.
Note: It is not recommended that Program Guide be enabled unless the the
front panel overlay properly labels the < button. Standard TVs do not label this
button.
To Change the program Guide : Enable/Disable
Select (CH
) program guide.
Press VOL
to make the selection change. The ON setting enables the
Program Guide to be displayed.
H
ow do I change the features of the TV?
Main SETUP MENU
SETUP MENU
Ver : x.x.x
Rental: Free
Picture
Sound
Channel Setup
F
F e
e a
a tt u
u rr e
e s
s
Blocking
Language: English
To Select
+ -
To Accept
Features MENU
Features
Marquee
Speaker
Program Guide : Off
Rental : Menu key
Computer : On
Aspect : On
CCD :Off
To Select
+ -
To Accept