Eleyus DWB 45025, Руководство по эксплуатации

Страница: 59 / 73

59
the softener system has to be refreshed so that it operates with the same performance
also during the next wash. For this purpose, dishwasher salt is used.
ATTENTION!
USE SOFTENER SALT SPECIFICALLY PRODUCED FOR
USE IN DISHWASHERS.
7.3. To add softener salt, open the salt compartment cap by turning it counter
clockwise. At first use, fill the compartment with 2 kg salt and water until it is almost
overflowing. If available, using a funnel will make filling easier. Replace the cap and
close it. After every 20-30 cycles add salt into your dishwasher until it fills up (approx.
1.5 kg).
Only add water to the salt compartment on first use.
ATTENTION!
DO NOT USE TABLE SALT. USING ANY OTHER TYPE OF
SALT CAN DAMAGE YOUR DISHWASHER.
7.4. To understand whether there is enough dishwasher softener salt, just look at
the transparent part of the salt compartment cap. To understand whether there is enough
salt in the dishwasher to soften, just look at the transparent part of the salt cap. Salt is
enough if the transparent part is green, if it is not green - salt is not enough.
8.
WATER SOFTENING SYSTEM SETTINGS
8.1. The efficiency of the dishwasher depends on the softness of the tap water.
That's why dishwashers use water softener system. If this system is set up correctly,
the efficiency of the dishwasher increases.
8.1.1. To find out the hardness level of your tap water, contact your water company,
or use a test strip (if available).
Open
control
strip
Run water through the
tap (1min.)
Keep the strip in the
water (1sec)
Shake the strip. Wait (1min.)
Set the hardness level of
your machine.
Level 1
No lime
Level 2
Very low lime content
Level 3
Low lime content