background image

Page 20

On/Off Plug-In Switch Advanced User Manual

Warranty & Support

If you have questions, our trained Customer Service Depart-

ment is happy to assist you 24 hours a day, 7 days a week. 

Contact Dome Customer Service as follows: • In North America 

dial: 1-855-249-1754 • Email Dome at [email protected] 

DO NOT RETURN THIS PRODUCT TO THE STORE OR WEBSITE 

FROM WHICH IT WAS PURCHASED

If you believe the product is defective, has a missing or broken 

part or are having difficulty with it please contact Dome as list

-

ed above for a quick and efficient solution to the problem. 

Legal Notices: This device complies with part 15 of the FCC 

rules. Operation is subject to the following two conditions (1) 

This device may not cause harmful interference, and (2) this 

device must accept any interference received, including inter-

ference that may cause undesired operation.

Note: This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications.

However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harm-

ful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to try to correct the

interference by one or more of the following measures: Reori-

ent or relocate the receiving antenna; increase the separation 

between the equipment and the receiver; connect the equip-

ment into an outlet on a circuit different from that to which the 

receiver is connected.  Consult the dealer or an experienced 

radio/TV technician for help.

This device complies with Industry Canada license-exempt RSS 

standard(s). Operation is subject to the following two condi-

tions: (1) this device may not cause interference, and (2) this 

device must accept any interference, including interference 

that may cause undesired operation of the device.

Elexa Consumer Products, Inc. (”ECP”) warrants to the original 

retail purchaser (”Purchaser”) that the DOME Window/Door 

sensor (the “Product”) will be free of defects in materials or 

workmanship under use for one (1) year from the date of pur-

chase (the “Warranty period”).

For the Purchaser only, if the Product fails to perform as speci-

fied during the Warranty Period due to defective parts or faulty 

workmanship, ECP will repair or replace the defective or dam-

aged parts of the Product. Normal wear and tear is not covered 

nor is abnormal use, misuse, mishandling, faulty installation, 

improper  shipping,  damage  caused  by  disasters  such  as  fire, 

flood or earthquake, neglect, accident or tampering. This war

-

ranty covers only normal use in the United States or Canada.

To obtain warranty service during the Warranty Period, call 

Dome Customer Service (1-855-249-1754) or email: support@

domeHA.com for instructions on sending damaged parts and 

documentation for a Return Material Authorization (RMA).  

Products returned to ECP for repair or replacement without au-

thorization will be returned at the sender’s expense. All warran-

ty claims must be accompanied by a legible copy of the original 

receipt showing date and details of purchase. The RMA number 

must be clearly written on the side of the shipping container in 

which you return the Product or defective parts. Unless other-

wise instructed by ECP, the Product must be sent freight pre-

paid to the following address:

Elexa Consumer Products, c/o Promac,

1153 Timber Dr., Elgin, IL 60123

ECP will repair or replace the defective parts and return them 

at ECP’s cost by a shipping method selected by ECP. When con-

tacting ECP to obtain an RMA, Purchaser may request expedit-

ed return shipping at Purchaser’s expense.

THIS WARRANTY IS NOT TRANSFERABLE, AND, TO THE MAXI-

MUM EXTENT PERMITTED BY APPLICABLE LAW IS IN LIEU OF 

ALL OTHER WARRANTIES, REPRESENTATIONS AND CONDI-

TIONS, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, 

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

NO OTHER PERSON OR REPRESENTATIVE IS AUTHORIZED TO 

MAKE ANY OTHER WARRANTY ON BEHALF OF ECP OR ASSUME 

FOR ECP ANY OTHER LIABILITY IN CONNECTION WITH THE SALE 

OF THIS PRODUCT. IN NO EVENT WILL ECP BE LIABLE FOR ANY 

DAMAGES, INCLUDING BUT NOT LIMITED TO INCIDENTAL, SPE-

CIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE 

OR INABILITY TO USE THE PRODUCT, INCLUDING DAMAGES 

DUE TO ECP’S NEGLIGENCE. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU 

MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO 

STATE AND COUNTRY TO COUNTRY.

This marking on the product, accessories or literature indicates 

that the product and its electronic accessories should not be 

disposed of with other household waste.

To prevent possible harm to the environment or human health 

from uncontrolled waste disposal, please separate these items 

from other types of waste and recycle them responsibly to pro-

mote the sustainable reuse of material resources.

Household users should contact either the retailer where they 

purchased this product, or their government office, for details 

of where and how they can take these items for

environmentally safe recycling.

Business users should contact their supplier and check the 

terms and conditions of the purchase contract. This product 

and its electronic accessories should not be mixed with

other wastes for disposal.

This marking on the battery, manual or packaging indicates 

that the batteries in this product should not be disposed of with 

other household waste. Where marked, the chemical symbols 

Hg, Cd or Pb indicate that the battery contains mercury, cadmi-

um or lead above the reference levels in EC Directive 2006/66. 

If batteries are not properly disposed of, these substances can 

cause harm to human health or the environment.

Warranty & Support

Содержание DOME DMOF1





















Отзывы: