Page 13
Motion Detector Advanced User Manual
Compatible Command Classes
Command Class
Notes
Device Reset Locally V1 (5A)
-
Powerlevel V1 (73)
-
Association Group Information V1 (59)
-
Battery V1(80)
-
Z-Wave Plus Info V2 (5E)
Returned Value:
01 06 00 0C 07 0C 07
Z-Wave Plus Version:
01
Role Type
: 06
(Slave Sleeping Reporting)
Node Type
: 00
(Z-Wave Plus Node)
Installer Icon Type
: 0C 07
(Home Security Alarm)
User Icon Type
: 0C 07
(Home Security Alarm)
Version V2 (86)
Returned Value:
03 04 05 03 50 42 00
Z-Wave Library Type:
03
(Enhanced Slave)
Protocol Version
: 04 05
Protocol Sub-Version
: 03 50
Application Version
: 42
Application Sub-Version
: 00
Manufacturer Specific V2 (72)
Returned Value:
02 1F 03 01 06
Manufacturer ID:
02 1F
Product Type
: 03
Product ID
: 00 83
Multilevel Sensor (31)
The Motion Detector monitors ambient light levels and reports this data
to the main controller using the Multilevel Sensor command class. The
light is measured everytime motion is detected and periodically (every
180 s by default; see Parameter 07.) Each time the device wakes up or
checks the light level, the Param 7 clock is reset. A report is sent only if
the light is at least 100 Lux more intense than the last
reported
value.
Returned Value:
03 0A XX XX
Sensor Type
: 03
(Luminance)
Precision/Scale/Size
: 0A
(Precision = 000; Scale = 01; Size = 010)
Sensor Data
: 00 00 ~ FF FF
(0 ~ 65,535 in Lux)
Table 4 - Command Classes
Compatible Command Classes
