elero Invio-868, Руководство по эксплуатации

Страница: 11 / 13

20 | EN Ⓒ elero GmbH
Ⓒ elero GmbH EN | 21
4.6.3 Moving to the ventilation/fabric tautening position
(roller shutter/awning)
Requirement:
‰
The Invio-868/Invio-915 must be programmed.
1. On the Venetian blind switch ▼ ▲ , press the UP button twice
in quick succession.
2. The shutter/awning travels to the saved ventilation position.
If there is no programmed ventilation or fabric tautening position,
the shutter/awning travels to the lower end position.
4.7 Deleting the transmitter
The programming button P must be held down for at least 12 seconds.
LED lighting (red, 1 second duration) on the Invio-868/Invio-915
indicates that the deletion process has been completed successfully.
5 EU Declaration of Conformity
elero GmbH hereby declares that the radio system type Invio-868
is in compliance with Directive 2014/53/EU. The complete text of
the EU Declaration of Conformity is available at the following
Internet address: www.elero.de/downloads
6 Troubleshooting
Fault Cause Remedy
Drive running in
wrong direction
Incorrect direction
programmed.
Delete transmitter
and program
correctly.
Fig. 5 Troubleshooting for the Invio-868/Invio-915
7 Repair
Please contact your specialist if you have any questions.
Please always provide the following information:
• Item number and designation on the type plate
• Type of fault
• Unusual events preceding fault
• Accompanying conditions
• Your own theories regarding the cause of the problem
8 Manufacturer's address / Service
elero GmbH
72660 Beuren
Germany
www.elero.de
If malfunctions have occurred or equipment has been damaged
despite proper handling, please contact your contractor or dealer.