Programming
GB-25
GB-26
Programming
7. Now select the PROG2 INDIVIDUAL function you require using
the
+/-
buttons:
BLOCK
Press
+/-
for the BLOCK menu level (BLOCK 1 (1-5),
BLOCK 2 (6,7)). All further entries now refer to BLOCK 1 (1-5) and
BLOCK 2 (6,7).
Confirm by pressing
OK
.
INDIVIDUAL:
Press
+/-
for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to every individual day of the week.
Confirm by pressing
OK
.
WEEK:
Press
+/-
for the WEEK menu level (1-7). All further entries now
refer to every day of the week.
Confirm by pressing
OK
.
8. Now set the SWITCHING TIME
v
and the SWITCHING TIME
b
using the
+/-
buttons.
Confirm your entry by pressing
OK
.
9. Press the
MENU
button to switch to operating mode.
PROGRAMME
PROG 2/OFFSET
(e.g. shutters are lowered to ventilation position in
the evening)
GB
O K
O K
O K
PROGRAMME
PROG 2
OFFSET
OFFSET
min
b
PROGRAMME
OK
OK
OK
OK
+/–
1. Press the
MENU
button.
2. To select the PROGAMME menu, press the
+
button until
PROGAMME appears.
3. Confirm by pressing
OK
.
4. Press the
+
button until PROG2 appears.
5. Confirm by pressing
OK
.
6. Press the
+
button until the OFFSET menu appears.
7. Confirm by pressing
OK
.
8. You can set the time for the DOWN control command to be
triggered separately using the
+/-
button (max. +/- 240 mins,
depending on PROG1 SWITCHING TIME
b
).
Confirm by pressing
OK
.
9. Press the
MENU
button to switch to operating mode.
Note:
Using the SETTING menu level, you must enter the switching
time of the intermediate position and select PROG 2
VENTILATION for the position of the end limits.
