Elephant door Скачать руководство пользователя страница 25

23

Charging the battery
Do not connect the Pro-
duct to other electrical 
devices. The Micro USB 
output is designed only 
for charging the device 
battery and for updating 
the device software in 
case the Manufacturer 
offers an updated so-
ftware version. Charging 
the device with other 
cable than the one provi-
ded by the Manufacturer 
is not recommended. If 
the Product is damaged 
as a result of charging 
the battery with a Micro 
USB cable other than 
that provided by the Ma-
nufacturer, the User will 
be fully liable for such da-
mage. Do not touch the 
device with wet hands 
during charging. When 
the cable is overheating 
or gets damaged, and 
when the device is expo-
sed to rain or other liquid, 
disconnect the device 
from charging. 
NoTe: When being char-
ged, the device does not 

detect vibrations or door 
opening, and it does not 
connect with the Wi-Fi 
and your smartphone. 
The device connected 
for charging does not 
provide protection and 
must not be used for this 
purpose.

Using the device
This device is intended 
for use indoors in house-
holds and offices. It is 
not fit for use outdoors 
and in industrial environ-
ments. The Product is 
intended for operation in 
the temperature ranging 
from +5°C to +35°C and 
in the humidity range 
of 20% to 60%. The 
Product is intended for 
use on exterior single or 
double doors only. The 
Manufacturer does not 
guarantee that the devi-
ce will operate properly 
on other types of doors, 
including in particular 
on sliding, revolving and 
up-and-over doors. The 
device must be cleaned 

with a dry anti-static 
cloth. Do not clean the 
device with water and/or 
chemicals. Do not open 
the device and do not 
interfere in the inside of 
the device in any way. 
There are no compo-
nents inside the device 
that could be repaired 
by the User. Opening the 
device may create a he-
alth hazard. The device 
may only be opened by 
the Manufacturer’s dedi-
cated support team. Do 
not throw, kick, hit, clasp, 
crush, break, smash, bite 
or swallow the Product 
and any of its parts. 
Do not throw the device 
in a bin. The Product 
houses a lithium polymer 
battery and other elec-
tronic components that 
need to be stored in pla-
ces designated for this 
purpose.

information about
radio waves
The operating frequency 
range of the device is: 

Содержание door





























Отзывы: