background image

5

Chapter 3 

I N S T A L L A T I O N   M A N U A L   |

WARRANTY 

NB: 

Should a problem occur, that you are not able to fix yourself with 

the help off the support in 

APPENDIX A

APPENDIX A

 to 

C

C

please

 contact you installer 

or dealer. 

The Element4 devices on which this warranty is applicable are made 

of high quality materials. Should any problem or defects still occur the  
following provision are in effect; 

1. 

Before  any  installation,  the  installer  will  ensure  himself  of  the 
good quality and operation of the flue channel. The gas fireplaces 
are to be installed by a competent installer, according to the rules 

and regulations that are applicable in the country (or even region) 
of installation and those as described in this manual.

2. 

There is a warranty period of two years for all Element4 devices, 

starting from the moment of purchase. The date of purchase 
should be mentioned clearly on the purchase invoice. 

3. 

The  ceramic  glass  is  not  included  in  the  warranty,  as  are  the 
physical or chemical outside influences during transport, storage 

or montage. 

4. 

If a malfunction should occur during warranty period that is a 

consequence  of  a  assembly  error  or  material  defect,  Element4 
will  provide  a  free  replacement  part  to  the  installer,  without 

compensation for disassembly or montage.

5. 

In  case  the  installer  is  not  able  to  fix  the  problem  himself,  a 
request can be made to Element4 to do it for him, as long as the 

service can be done within the borders of the Benelux. 

6. 

Only after consulation up front, the device or loose parts can be 

send for check up or replacement. These goods are the be send 
with the necessary warranty documents and the date of purchase.

7. 

When a house visit should occur for service purposes by Element4 

(within  the  borders  of  the  Benelux)  during  warranty  period,  the 

right documentation (i.e this page and a proof of purchase) should 
be available.

For  a  service  provision  to  house,  outside  the  warranty  period,  the 

following costs ar ebeing charged:  

Materialcosts

• 

Working hourse

• 

Call-out costs

The warranty is not applicable in the following cases: 

1. 

When one of the previous point is not met 

2. 

When changes are made, of which Element4 is not made aware  of 

/ has approved of  upfront 

3. 

When device is not installed and/or used properly according to 
the installation manual. 

4. 

When other then the prescribed decoration material is used. 

5. 

When the device is installed (partially or fully) with other materials 
than prescribed in this manual. 

Содержание BIDORE




































Отзывы: