Element4 ARCHITECT Series, Руководство по установке, Страница: 30 / 33

2 9
Appendix F I N S T A L L A T I O N M A N U A L |
Gas type » NATURAL GAS LPG
Country of use »
AT,BG,CH
DK,ES,FI
GB,GR,HR
IE,IT,LT
LV,NO,PT
RO,SE,SI
SK,TR
DE,LU
PL BE,FR DE NL
BG,DK,EE
FI,GB,GR
HU,HR,IT
LY,MT,NL
NO,RO,SE
SI,SK,TR
CZ,LT
NL,SK
AT,CH
CZ,DE
AT,BE,CH
CZ,DE,ES
FR,GB,IE
IT,NL,PT
SK,TR
Gas Category » I2
H
I2
E
I2
E+
I2ELL I2
L
/ I2
EK
I3
B/P
I3
p
I3
P
I3+
Unit G20 G20 G20/G25 G20/G25 G25/G25,3 G30/G31 G30 G31 G30/G31
Supply pressure mbar
20 20 20 / 25 20 25 30 30 50
28 -
30/37
Burner pressure mbar
15 15 15 / 21 15.0 21 28 28 28 28
Gross input kW
13,5 13,5 13,5 / 12,6 13,5 13 15,5 13.5 15 15
Net input kW
12,2 12,2 12,2 / 11,3 12,2 11,3 14 12.2 13,5 13.5
max. Heat
output
kW
10,9 10,9 10,9 / 10,1 10,9 10,1 12,4 10.8 12 12
min. Heat output kW
2,7 2,7 2,7 / 2,4 2,7 2,4 2,9 2,8 2,9 2,9
(Max.) Gas usage
m
3
/hr 1.3 1.3 1.3 / 1.45 1.3/1.45 1.45 0.53 0.48 0.53 0.53
kg/hr 0.9 0.9 0.9/1.1 0.9/1.1 1.1 1 0.9 1 1
NOx mg/kWh
input
<100 <100
Pilot
440-1650-312 440-1350-271
Burnerinjection
4x 280 4x 120
Type of flue C11 / C31 / C91
Additional electricity use
• At rated heat output el
max
9
-5
kW
• With minimal heat emission el
min
9
-5
kW
• In standby mode el
sb
9
-5
kW
Power requirement for the permanent pilot light
Power requirement for the permanent pilot
light (requirements applicable)
P
pilot
Does not
apply
Efficiency (NCV)
• Efficiency at rated heat output η
th, nom
83 %
• Efficiency at min. heat output (indicative) η
th, min
54 %
Type of heat release / control room temperature (Select one)
• With electronic control of the room temperature plus week
switch
Other control options
• Control of the room temperature with presence detection
• Control the room temperature with open window detection
• With the option of remote control
• With adaptive control of the start
• With limitation of the operating time
Glass Dimension
Inside glass 611 x 538.5 x 4 (HxWxD)
Outside glass 627 x 691 x 5 (HxWxD)
Corner glas 625 x 86.75 x 5 (HxWxD)
F TECHNICAL DATA
The dataplate specifies for which type of gas, gas pressure and for which
country this appliance is intended. The nameplate is attached to a chain.
It must remain attached to the chain.
Note: Check whether the appliance is suitable for the gas type and gas
pressure on site.