Once in position, the belt should look like this:
Please note, It is perfectly ok for both sides of the
belt to overlap, or for there to be a between the two sides.
To loosen the belt:
First, undo the strap from the velcro by pulling it away from the belt, next,
place your left palm on the E26 Logo and grab the exposed portion of the metal buckle with your
left hand and pull it away from you (See the image below for where to pull). It should instantly
pop loose with a little bit of pressure. Finally, pull the strap out of the self-locking buckle and
remove the belt.
Copyright 2017
Element 26 LLC
www.element26.co
