KERCOMET 170
and
210, MULTIMIG 150
Start-up
19
45
Symbol wire feed
lights up in the 7-segment display 47 if the
wire feed is displayed in m/min.
46
Symbol welding current
lights up if the 7-segment display 47
displays the welding current in Ampere.
47
7-segment display welding current / wire
feed depending on set mode, either wire
feed, welding current or secondary
parameter value will be displayed.
49
Symbol 4-stroke
lights up if 4-stroke mode is selected.
50
Symbol 2-stroke
lights up if 2-stroke mode is selected
51
Symbol spot-welding
lights up if spot welding mode is selected.
52
Symbol interval
lights up if interval mode is selected.
53
Symbol material thickness Display 55
lights up if the material thickness is
displayed in mm.
54
Symbol welding voltage
lights up if the 7-segment display 55
displays the welding voltage in V.
55
7-Segment display material thickness /
welding voltage
according to set characteristic line (see
chapter characteristic setting) or mode
either the material thickness, welding
voltage or secondary parameter codes will
be displayed.
56
Main switch
for switching the welding unit ON and
OFF.
57
Step switch material thickness / welding
voltage
for adjusting the material thickness alt. the
welding voltage, values will be displayed in
the 7-segment display 55.
58
Symbol 230 V
lights up if 230 V welding voltage is set.
(machines with changeover switch only).
59
Symbol 400 V
lights up if 400 V welding voltage is set.
60
Mode selection key
for setting of mode, either 2-stroke, 4-
stroke, spot welding or interval.
61
Turning knob wire feed for wire feed
adjustment.
By activating the turning knob, the wire
feed is displayed in the 7-segment display
47 as correction value in %, after setting in
speed m/min.
13.3 Current/voltage display
47
Current indicator
55
Voltage display
The actual values of welding voltage and
welding current are displayed during and after
welding. If any changes of the set values by
the operator (i.e. step switch, turning knob,
key) take place, the main parameter wire feed
and material thickness will be displayed.
