Elektron Digitone Скачать руководство пользователя страница 66

Страница: 66 / 86

15. STARTUP MENU

15. STARTUP MENU

Press and hold the

[FUNC]

key while powering up the Digitone to access the STARTUP menu. Here you

can perform a variety of tasks. Press the corresponding

[TRIG]

key to choose the different alternatives.

15.1 TEST MODE

Press the

[TRIG 1]

key to enter TEST mode.

For testing purposes, a short sound is sent through all outputs of the unit.

You can perform this self-test if you have any trouble with your Digitone and suspect it may be due to a

hardware problem. Use the

[UP]

and

[DOWN]

keys to scroll through the test log. A fully functional device

should not report any errors. Please contact Elektron support or the retailer that you bought your Digitone

from if the device log reports an error.

15.2 EMPTY RESET

Press the

[TRIG 2]

key to perform an empty reset. The reset erases all patterns and sounds, but the data

on the +Drive remains intact.

15.3 FACTORY RESET

Press the

[TRIG 3]

key to perform a factory reset. When you perform a factory reset on the Digitone, it

overwrites and re-initializes the active RAM project (including all pattern and global data). The +Drive proj-

ect slot 1 is overwritten and re-initialized with factory preset patterns, sounds, and settings. Sound bank A is

overwritten with the factory sounds.
If you wish to keep the active project, remember to save it to a +Drive project slot higher than 1 before you

perform a factory reset.

15.4 OS UPGRADE

Press the

[TRIG 4]

key to initiate the OS upgrade. Digitone enters a waiting stage, and listens for incoming

OS data, and “READY TO RECEIVE” is shown on the screen. You must connect the device you use to send

the OS syx file to the MIDI IN port of Digitone for the transfer to be possible. Use our free C6 SysEx utility

software to send the OS syx file. You can download the C6 SysEx utility software and the OS syx file from

the Elektron website.

•

You cannot use the Elektron Transfer software to transfer OS syx files when you are in the

STARTUP menu.

•

USB MIDI transfer is not possible when you want to upgrade the OS from the STARTUP

menu.

On your computer, download the OS syx file, open the C6 software. Click CONFIGURE and select Digitone

for MIDI In as well as MIDI Out. Drag the syx file to the C6 main window, then highlight it by clicking on it

with the mouse pointer. Click the “send” button in the top left corner of the C6 window.
A progress bar shows the progress of the OS upgrade. The message “UPGRADING... DO NOT TURN OFF”

appears when the transfer is finished. Please note that the upgrade takes a little while. The device restarts

when the upgrade process is finished.

When you send the OS syx file, use our free Elektron C6 software. You can download it from

the Elektron website.

15.5 EXIT

Press the

[TRIG 5]

key to exit the STARTUP menu.

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 66 / 86

Результаты поиска

Содержание Digitone

Отзывы: