Elektron Digitone Скачать руководство пользователя страница 49

Страница: 49 / 86

12. MIDI TRACK PARAMETERS

12. MIDI TRACK PARAMETERS

Here follows a description of the parameters that are on the MIDI tracks PARAMETER pages. The MIDI

tracks parameters are saved together with the pattern. You can press and hold a

[TRIG]

key, and then

change the parameters settings with the

DATA ENTRY

knobs to lock the parameters to other settings on

any step of the pattern. For more information, please see “10.10.1 PARAMETER LOCKS” on page 34.

12.1 EDITING THE MIDI TRACK PARAMETERS

There are five PARAMETER pages for the MIDI tracks. Press the

[PARAMETER]

keys to access the MIDI

tracks PARAMETER pages. Use the

DATA ENTRY

knobs

A-H

to change the parameters. Press and hold a

[PARAMETER]

key to see the values for all parameters on that page.

12.2 TRIG PARAMETERS PAGE

Here you find the parameters for the note trigs. Change settings using the

DATA ENTRY

knobs. These gen-

eral settings affect note trigs placed in the sequencer.
Press

[TRIG PARAMETERS]

to access this parameter page.

12.2.1 ROOT

Root sets the default note value that the note trigs placed in GRID RECORDING mode have. If you

change the root note and have additional notes added on the same trig, then the additional notes are

offset and transposed accordingly. (C0–G10)

12.2.3 VEL

Trig Velocity controls the velocity of the notes the MIDI track sends out. A setting of 0 equals a NOTE

OFF command. (1–127)

12.2.4 LEN

Trig Length sets the duration of the notes. When a note has finished playing a NOTE OFF command is

sent. The INF setting equals infinite note length. (0.125–128, INF)

12.2.5 COND

Trig Condition is a set of conditional rules that can be applied to any trig, using a parameter lock. Each

setting is a logical condition, which determines whether or not the sequencer note is triggered. For more

information, please see “10.10.3 CONDITIONAL LOCKS” on page 35.

12.2.6 LFO.T

LFO Trig controls if the LFO is trigged or not. (ON, OFF)

12.3 SYN1 PAGE (MIDI SOURCE)

Here you can set the MIDI channel that the MIDI track should use to send data. Bank and program change

values are also set here, together with a few standard CC parameters. The default value of the parameters

on this page is OFF, meaning they are disabled and do not send out any data. Press and hold

[FUNC]

and

then press the

DATA ENTRY

knobs to enable them. You can then use the

DATA ENTRY

knobs to set the

parameter values as usual. Disable the parameters again by repeating the activation procedure.
Press

[SYN1]

[SYN2]

once to access this parameter page.

Содержание Digitone























































































Результаты поиска

Содержание Digitone

Отзывы:

Elektron Digitone, Руководство пользователя, Страница: 49 / 86

Результаты поиска

Содержание Digitone

Отзывы: