manualshive.com logo in svg

Elektromaten TS 980, Руководство по эксплуатации, Страница: 24 / 38

Поделиться
Скачать
Elektromaten TS 980 Скачать руководство пользователя страница 24

page 24

Recognise
safety edge system OK ?

Safety edge
1,2 K Ohm               OK?

Safety edge
1,2 K Ohm               OK?

The TS 980 Control panel is able to recognise and work with several  safety edge system
(SKS). For detail see page 8. All available systems are listed.
After the limits are set correctly, the display shows:

To identify SKS, OK button must be pressed.
The connected safety edge system is recognised
and the display shows resistance evaluation or
name of system, e.g.
FRABA SK  OK ?
If no safety edge system is connected the
display shows 'safety edge system  not available'
and the door will move only in DEAD MAN MODE
in the downwards direction. A defective safety edge
system has the same effect.

To exit use ESC

Leaving this point is not possible and can only be confirmed
by OK.

Leaving this point is not possible and can only be confirmed
by OK.

Recognition starts automatically. To confirm SKS
system ( resistance evaluation) press OK and the
rubber profile must be pressed by hand to make
contact.

After confirmation by pressing  OK and making a
contact on the rubber-profile the safety edge system
is on order.

Safety devices

ADJUSTMENT OF THE LIMITS/ BASIC-FUNCTION

ESC

OK

ESC

OK

ESC

OK

Содержание TS 980







































Отзывы:

Нет отзывов