BPT010
WIRELESS ROOM THERMOSTATFOR CONTROL
OF HEATING DEVICES
MADE IN CZECH REPUBLIC
The biggest advantage of BPT010 is the two way communication with the receiver and very simple
control of desired temprature by turn of roller on the transmittor. Installation without cutting the wall
and pulling wires are other advantages that convince you to modernize the regulation of your heating
system.Receiver is equipped with the autodidactic system and the E-EPROM memory that will keep
the stored code even during voltage failure.
The BPT010 can control only one receiver.
TECHNICAL PARAMETERS
Power supply
2x1,5 V alkal. batteries
Communication type two-way
Frequency
433,92 MHz
Vf-Sensitivity
<10mW
Hysteresis
0,4 °C
Temp. range
11 °C to 29 °C (frost protection 3°C)
Protection
IP20
Working temp.
0 to 40°C
Accuracy
± 1°C
DECLARATION OF CONFORMITY
We, ELEKTROBOCK CZ s.r.o., herewith declare that our product BPT010 is in conformity with
the basic requirements and other respective provisions of the directive 1999/5/ES. Issued:
1.04.2012
MADE IN CZECH REPUBLIC
Pb
LEAD FREE
Im Einklang mit RoHS
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz
CERTIFICATE OF GUARANTEE
(guarantee period for the product amounts to 2 years)
product No.:
examined by::
date of sale::
stamp of shop:
Send the product for guarantee and after guarantee service to manufacturer’s address.
IMPORTANT INFORMATIONS
IF
CAUSE and SOLUTION
On the transmitter
flashes the LED
3 x in 8 s
Necessity of battery exchange.
Remowe the batteries for new ones.
On the transmitter
flashes the LED
2 x in 8 s
Transmission error signal betwen transmitter and receiver
Check if the receiver is right connected to power supply. On receiver
press for about 3s the button for testing the connection - the relays
must several times switch on and off.
