ELEKTRA SelfTec DW, Руководство по установке

Страница: 10 / 67

10
Installation of heating cables
inside pipes
Mount the plumbing tee joint on the pipeline
in order to position the heating cable inside
the pipe with the HL-T plumbing lead-through.
The set of plumbing lead-throughs for
1" pipes is available as an accessory. If the pipe’s
diameter is larger than 1”, use a reducing tee
joint with a proper branch (with internal thread
1”), on which the lead-through will be mounted.
The relevant self-regulating ELEKTRA SelfTec DW /
DW F heating cable should be cut to match the
pipeline’s length (the cable of the same length
or shorter).
The cables need to be terminated and connected
to the power supply conductor. For this purpose,
the EC-PRO and ECM25-PRO joint sets have to
be applied (installation manuals included in the
sets).
• Lead the cable through the elements of the
H-LT lead-through and enter through the tee
joint into the pipeline.
• When the cable has been entered, carefully
mount the lead-through to ensure that
the installation is tight.
1 2 3 4
/ ", / ",
H-LT
®
1. Entering the cable into a right angle
-shaped pipeline:
SelfTec DW/DWF
®
ELEKTRA