2
Statement:
1.The company reserves the right to modify any information in this document at any time.
This manual will be updated from time to time, updated content will be added in the new
version of the manual without notice.
2. This manual may contain technical inaccuracies or typographical errors.
3. The product is subject to the real object, and this document is only for reference.
4. If the operation is not in accordance with the guidance of this document, the user shall
bear the losses caused.
Safety Precautions:
1)When installing the equipment, please have qualified service personnel or system
installation personnel to operate.
2)Install the equipment in the environment with lightning protection measures.
3)Please do not touch the lens; prevent it from being damaged or dirty.
4)Please pay attention to prevent the lens from being worn, scratched or even torn.
5)Because uncooled infrared thermal imager uses very sensitive thermal sensors,
therefore, under no circumstances (power on or off), the lens shall be directly aimed at the
strong radiation source (such as the sun, direct laser beam or reflection, etc.), Otherwise,
it will cause permanent damage to uncooled infrared thermal imager
6)This product is a sophisticated electronic instrument, so please handle it carefully during
use, storage and transportation, prevent the equipment from being collided by external
force or falling from high place.
7)During transportation and storage, the ambient temperature shall not be lower than -
25
℃
; the original packing box must be used during transportation.
8)Before turning on the device, make sure that the power supply is connected properly. If
the power supply is connected incorrectly, the device may be damaged.
9)Do not press any object on the power line, and do not place the equipment where the
power line is easy touched.
10)If the equipment runs abnormally, please contact the supplier, do not dismantle the
equipment by yourself.
